VNP10N07-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 50W |
| Base Part Number | VNP10N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 18V |
| Voltage | 70V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Current | 10A |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 50W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 500μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 70V |
| Turn-Off Delay Time | 400 ns |
| Continuous Drain Current (ID) | 10A |
| Threshold Voltage | 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 100m Ω (Max) |
| Drain to Source Resistance | 100mOhm |
| Height | 15.75mm |
| Length | 10.4mm |
| Width | 4.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNP10N07-E Overview
The LED driver's packaged as a Tube.There is a TO-220-3 package that includes it.Mounting type Through Hole is selected for the LED driving board.The switch type of this switch is General Purpose.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts.It belongs to the VNP10N family.It is necessary to use the 3 pins in order to operate the LED driver.The maximum output current is reduced to 10A to meet the operation criteria.This lighting driver is mounted in the way of Through Hole.The LED driver has 100mOhm resistance.The OMNIFET?, VIPower? series includes this electrical component.This case has the output current set to 7A.Optimal efficiency requires a voltage of 18V.For stable operation, the maximum operating temperature should be 150°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.For its operation, a current of 500μA is required.
VNP10N07-E Features
Resistance of 100mOhm
VNP10N07-E Applications
There are a lot of STMicroelectronics VNP10N07-E Power Switches ICs applications.
- Hot Swap
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Various applications equipped with buttons
- Portable Video Game Players
- USB Ports/Hubs
- Wireless Headsets
- Storage (HDDs, SSDs)
- Wearable Devices
- Solid State Drivers
