VNP10N07FI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | ISOWATT-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 70V |
| Max Power Dissipation | 31W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Current Rating | 10A |
| Base Part Number | VNP10N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 31W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 10A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.9 μs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 100m Ω (Max) |
| Drain to Source Resistance | 100mOhm |
| Turn Off Time | 6 μs |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP10N07FI Overview
It is packaged in the form of a Tube.It's included in the ISOWATT-220-3 package.It has been mounted as Through Hole on the LED driver.General Purpose is the switch type that it owns.By default, it is set to output 1.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It comes under the family of VNP10N.As a result, there are 3 terminations.In order to operate, the 3 pins are used.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 7A.Through Hole is mounted in the way of this lighting driver.As a result, it has a total of 3 pins.The LED driver has 100mOhm resistance.It is included in the OMNIFET?, VIPower? series.This case results in a 7A output current.For maximum efficiency, the supply voltage should be set to 18V.It operates at a maximum current of 250μA.
VNP10N07FI Features
Resistance of 100mOhm
VNP10N07FI Applications
There are a lot of STMicroelectronics VNP10N07FI Power Switches ICs applications.
- USB Ports/Hubs
- Portable Music Players
- Gaming
- Wireless/Networking Cards
- Smartphone and PDA
- Notebook PC
- Low Voltage I/O System Power
- Portable GPS Device
- Hot Swaps
- Portable/Handheld Devices
