VNP14N04
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 42V |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Current Rating | 14A |
| Base Part Number | VNP14N |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Supply Current-Max | 0.5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 160ns |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 70m Ω (Max) |
| Turn Off Time | 7.5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP14N04 Overview
As you can see, it's packaged in the way of a Tube.It's included in the TO-220-3 package.The LED driver is mounted as Through Hole.General Purpose is the switch type it owns.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.It is a member of the VNP14N family.It has a total of 3 terminations.It has 1 functions.This results in the maximum output current dropping to 10A to meet the operation criteria.It is mounted in the way of Through Hole.A total of 3 pins are included in this LED driver.This electrical component is part of the OMNIFET?, VIPower? series.As a result, the output current is set to 14A.
VNP14N04 Features
VNP14N04 Applications
There are a lot of STMicroelectronics VNP14N04 Power Switches ICs applications.
- HDD and SSD
- USB Power Distribution
- Hot Swap
- Notebook and Tablet Computers
- Portable Music Players
- Gaming
- Wireless/Networking Cards
- Portable Devices
- Hot Swap
- Set-top-box
