VNP14N04FI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | ISOWATT-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 31W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | VNP14N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 31W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 14A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 μs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 70m Ω (Max) |
| Drain to Source Resistance | 70mOhm |
| Turn Off Time | 7.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP14N04FI Overview
As a result, it is packaged in the form of a Tube.It's included in the ISOWATT-220-3 package.This lighting drivere has a mounting type of Through Hole.General Purpose is the switch type it owns.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The VNP14N family consists of this type.In total, there are 3 terminations.The operation is carried out using the 3 pins.The LED driving board has a total of 1 functions.Maximum output current falls to 10A when operation criteria are met.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are present on it.There is 70mOhm resistance on the LED driver.Electrical components such as this are included in the OMNIFET?, VIPower? series.It is set to 10A in this case.It is recommended to set the supply voltage to 18V for optimum efficiency.It operates at a maximum current of 250μA.
VNP14N04FI Features
Resistance of 70mOhm
VNP14N04FI Applications
There are a lot of STMicroelectronics VNP14N04FI Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Ports/Hubs
- Gaming
- USB Power Distribution
- Mobile Communication Devices
- Smartphone and PDA
- Telecom and Network Systems
- Hot Swap
- HDD, SSD
- Hard Disk Drives
