Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-3 |
Weight |
2.240009g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Resistance |
35mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
74W |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Base Part Number |
VNP14N |
Pin Count |
3 |
JESD-30 Code |
R-PSFM-T3 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
12A |
Operating Supply Voltage |
18V |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
74W |
Output Current |
12A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Continuous Drain Current (ID) |
12A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Turn On Time |
4.5 μs |
Output Peak Current Limit-Nom |
24A |
Rds On (Typ) |
35m Ω (Max) |
Drain to Source Resistance |
35mOhm |
Turn Off Time |
25 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VNP14NV04 Overview
It's?packaged?in?the way?of?a?Tube.There is a TO-220-3 package that includes it.The LED driver is mounted as Through Hole.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This object belongs to the VNP14N family.It has a total of 3 terminations.It has 1 functions.The maximum output current is reduced to 12A to meet the operation criteria.The lighting driver is mounted in the direction of Through Hole.3 pins are connected to it in total.Currently, the LED driving board has a resistance of 35mOhm ohms.This electrical component can be found in the OMNIFET II?, VIPower? series.As a result, the output current is set to 12A.In order to maximize efficiency, the supply voltage should be set to 18V.A maximum current requirement of 100μA is required for its operation.
VNP14NV04 Features
Resistance of 35mOhm
VNP14NV04 Applications
There are a lot of STMicroelectronics VNP14NV04 Power Switches ICs applications.
- PC Card Hot Swap
- Smart Phones, Feature Phones
- PDAs
- Portable GPS
- Storage (HDDs, SSDs)
- Set-Top Boxes
- USB Protection
- Gaming
- Portable Music Players
- Set-top-box