VNP14NV04-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Supplier Device Package | TO-220AB |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 74W |
| Base Part Number | VNP14N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 6.8V |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 6V |
| Current - Output (Max) | 12A |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 70W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 ns |
| Switch Type | General Purpose |
| Rise Time | 350ns |
| Drain to Source Voltage (Vdss) | 55V |
| Fall Time (Typ) | 150 ns |
| Turn-Off Delay Time | 1.35 μs |
| Continuous Drain Current (ID) | 7A |
| Threshold Voltage | 2.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Number of Drivers | 1 |
| Rds On (Typ) | 35mOhm (Max) |
| Drain to Source Resistance | 35mOhm |
| Height | 4.6mm |
| Length | 10.4mm |
| Width | 9.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNP14NV04-E Overview
Tube is the way it's packaged.The TO-220-3 package includes it.This LED driving board is mounted using the mounting type Through Hole.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.The VNP14N family contains this object.The operation is performed through the 3 pins.This LED driver has a maximum output of 12AV.This results in the maximum output current dropping to 18A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount, Through Hole.There is 35mOhm resistance on the LED driver.It is included in the OMNIFET II?, VIPower? series.When this case is used, the output current is set to 12A.A total of 1 channels are available for you to choose from.A supply voltage of 6.8V is recommended for maximum efficiency.A maximum operating temperature of 150°C°C is required for stable operation.To ensure reliability, it should operate at -40°C degrees Celsius.It can handle a voltage of 8VV as its maximum supply voltage.It can work with as low a supply voltage as feasible, such as 6VV.It has 1 drivers in the part.
VNP14NV04-E Features
Resistance of 35mOhm
1 channels
VNP14NV04-E Applications
There are a lot of STMicroelectronics VNP14NV04-E Power Switches ICs applications.
- Hard Disk Drives
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Wearable Devices
- Portable Music Players
- USB3.1 Power Delivery
- Handheld Devices
- Storage Drives
- PDAs
- PC Cards
