VNP28N04FI
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 34W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | VNP28N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 34W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 28A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.7 μs |
| Output Peak Current Limit-Nom | 28A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | ISOWATT-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
VNP28N04FI Overview
The package is in the form of a Tube.It is included with the ISOWATT-220-3 package as well.This lighting drivere has a mounting type of Through Hole.There is a switch type of General Purpose.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.I believe it belongs to the VNP28N family.It consists of 3 terminations in total.During operation, the 3 pins are used.It has 1 functions.The maximum output current must drop to 19A to meet the operation criteria.In this case, it is mounted in the way of Through Hole.There are 3 pins in total on this board.Currently, the LED driving board has a resistance of 35mOhm ohms.There is an electrical component included in the OMNIFET?, VIPower? series.This case has the output current set to 19A.In order to maximize efficiency, the supply voltage should be set to 18V.250μA is the maximum current required to operate it.
VNP28N04FI Features
Resistance of 35mOhm
VNP28N04FI Applications
There are a lot of STMicroelectronics VNP28N04FI Power Switches ICs applications.
- USB Power Distribution
- Storage Drives
- HDD and SSD
- USB Protection
- Wireless Headsets
- Notebook PC
- Solid State Drivers
- USB Power Distribution
- Portable Video Game Players
- Portable GPS Device
