VNP35N07-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 150°C |
| Max Power Dissipation | 125W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | VNP35N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 35A |
| Voltage | 70V |
| Interface | On/Off |
| Current - Output (Max) | 25A |
| Current | 35A |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 35A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 80V |
| Continuous Drain Current (ID) | 18A |
| Threshold Voltage | 3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 800 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 280m Ω (Max) |
| Drain to Source Resistance | 28mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 15.75mm |
| Length | 10.4mm |
| Width | 4.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNP35N07-E Overview
It is package in Tube case.This package is included in TO-220-3.The lighting driver is mounted in the Through Hole position.General Purpose is the switch type it owns.The LED driver has 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family VNP35N.The termination count is 3.3 pins are used for operation.It has 1 functions.From the lighting driver, there is a maximum output of 25AV.The maximum output current must drop to 35A to meet the operation criteria.The lighting driver is mounted in the direction of Through Hole.3 pins are connected to it in total.The LED driver has 28mOhm resistance.It is part of the OMNIFET?, VIPower? series.The output current is set to 35A in this case.The maximum operating temperature of 150°C°C allows for stable operation.
VNP35N07-E Features
Resistance of 28mOhm
VNP35N07-E Applications
There are a lot of STMicroelectronics VNP35N07-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Telecom and Network Systems
- Wireless Modem Data Cards
- Hard Disk Drives
- Portable Devices
- Gaming
- PDAs
- Wireless Headsets
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
