VNP35N07FI
| Parameters | |
|---|---|
| Rds On (Typ) | 280m Ω (Max) |
| Drain to Source Resistance | 28mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; ZENER CLAMP |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | ISOWATT-220-3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 28mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 40W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | VNP35N |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 40W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 35A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.8 μs |
| Output Peak Current Limit-Nom | 35A |
VNP35N07FI Overview
It is packaged in the form of a Tube.It is included in the package ISOWATT-220-3.The mounting type of the LED driver is Through Hole.A General Purpose switch type is owned by it.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.It belongs to the family VNP35N.The termination count is 3.It consists of 1 functions.This results in the maximum output current dropping to 25A to meet the operation criteria.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are present on it.There is 28mOhm resistance on the LED driver.There is an electrical component included in the OMNIFET?, VIPower? series.The output current is set to 25A in this case.It is recommended to set the supply voltage to 18V for optimum efficiency.This system has a maximum current requirement of 250μA.
VNP35N07FI Features
Resistance of 28mOhm
VNP35N07FI Applications
There are a lot of STMicroelectronics VNP35N07FI Power Switches ICs applications.
- Wireless/Networking Cards
- Portable Devices
- Telecom and Network Systems
- Portable Music Players
- Portable GPS
- Hot-Swap Systems
- Gaming
- Portable/Handheld Devices
- USB Power Distribution
- Handheld Devices
