VNP35NV04
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Weight | 2.240009g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 13mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 125W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Current Rating | 30A |
| Base Part Number | VNP35N |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 70V |
| Turn-Off Delay Time | 120 μs |
| Continuous Drain Current (ID) | 18A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 13m Ω (Max) |
| Drain to Source Resistance | 10mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP35NV04 Overview
As a result, it is packaged in the form of a Tube.In the TO-220-3 package, it is included.The lighting driver is mounted in the Through Hole position.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The VNP35N family contains this object.It consists of 3 terminations in total.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 30A to meet the operation criteria.It is positioned in the direction of Through Hole.This LED driver is equipped with a total of 3 pins.There is 13mOhm resistance on the LED driver.It belongs to the OMNIFET II?, VIPower? series.This case results in a 30A output current.A supply voltage of 18V is recommended for maximum efficiency.There is a maximum current requirement of 100μA for its operation.
VNP35NV04 Features
Resistance of 13mOhm
VNP35NV04 Applications
There are a lot of STMicroelectronics VNP35NV04 Power Switches ICs applications.
- Hot Swaps
- Wearable Devices
- PDAs
- Notebook and Tablet Computers
- Portable GPS
- Hard Disk Drives
- Various applications equipped with buttons
- Set-Top Boxes
- Set-top-box
- Solid-State Drives
