VNP35NV04-E
| Parameters | |
|---|---|
| Lifecycle Status | PREVIEW (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Weight | 9.071847g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 13mOhm |
| Max Power Dissipation | 125W |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VNP35N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Rise Time | 2.5μs |
| Drain to Source Voltage (Vdss) | 70V |
| Fall Time (Typ) | 1.5 μs |
| Turn-Off Delay Time | 120 μs |
| Continuous Drain Current (ID) | 15A |
| Threshold Voltage | 2.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Rds On (Typ) | 13m Ω (Max) |
| Drain to Source Resistance | 13mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 6.35mm |
| Length | 31.75mm |
| Width | 12.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNP35NV04-E Overview
It is packaged in the manner of a Tube.It is included with the TO-220-3 package as well.In this case, the LED driving board is mounted as Through Hole.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The VNP35N family consists of this type.It contains 3 terminations.In order to operate, the 3 pins are used.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 45A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Through Hole is mounted in the way.It has 13mOhm resistance.This electrical component is part of the OMNIFET II?, VIPower? series.When this case is used, the output current is set to 30A.In order to optimize the efficiency of the supply voltage, it should be set to 18V.It has a maximum current requirement of 100μA.
VNP35NV04-E Features
Supplied from 5V
Resistance of 13mOhm
VNP35NV04-E Applications
There are a lot of STMicroelectronics VNP35NV04-E Power Switches ICs applications.
- Wireless/Networking Cards
- Handheld Devices
- Solid State Drivers
- Set-Top Boxes
- Set-top-box
- Hard Disk Drives
- Wireless Headsets
- HDD, SSD
- PDAs
- Solid-State Drives
