VNP49N04-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 125W |
| Base Part Number | VNP49N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 49A |
| Interface | On/Off |
| Current - Output (Max) | 30A |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 125W |
| Output Current | 49A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 49A |
| Threshold Voltage | 800mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Drain Current-Max (Abs) (ID) | 68A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 20m Ω (Max) |
| Drain to Source Resistance | 20mOhm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNP49N04-E Overview
As a result, it is packaged in the form of a Tube.This file is included in package TO-220-3.It has been mounted as Through Hole on the LED driver.General Purpose is the type of switch owned by it.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the VNP49N family.The operation is performed through the 3 pins.This lighting driver is capable of delivering a maximum output of 30A volts.In order to meet the operation criteria, the maximum output current drops to 49A.Through Hole is mounted in the way of this LED driving board.There is 20mOhm resistance on the LED driver.It is part of the OMNIFET?, VIPower? series.When this is the case, the output current is set to 49A.
VNP49N04-E Features
Resistance of 20mOhm
VNP49N04-E Applications
There are a lot of STMicroelectronics VNP49N04-E Power Switches ICs applications.
- Set-Top Boxes
- PC Cards
- Wireless Modem Data Cards
- Gaming
- Notebook and Tablet Computers
- Solid-State Drives
- Hard Disk Drives
- Solid State Drivers
- USB Protection
- USB Power Distribution
