Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
ISOWATT-220-3 |
Number of Pins |
220 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Series |
OMNIFET™, VIPower™ |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Voltage - Rated DC |
42V |
Max Power Dissipation |
125W |
Technology |
MOS |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Current Rating |
49A |
Base Part Number |
VNP49N |
Pin Count |
3 |
JESD-30 Code |
R-PSFM-T3 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
28A |
Interface |
On/Off |
Output Configuration |
Low Side |
Power Dissipation |
125W |
Output Current |
49A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Characteristics |
OPEN-DRAIN |
Continuous Drain Current (ID) |
49A |
Output Polarity |
TRUE |
Ratio - Input:Output |
1:1 |
Input Characteristics |
SCHMITT TRIGGER |
Voltage - Load |
33V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
42V |
Turn On Time |
3.8 μs |
Output Peak Current Limit-Nom |
49A |
Rds On (Typ) |
40m Ω (Max) |
Drain to Source Resistance |
40mOhm |
Turn Off Time |
24 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VNP49N04FI Overview
Tube is how it's packaged.In the ISOWATT-220-3 package, it is included.This LED driving board is mounted using the mounting type Through Hole.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.A lighting driver with Status Flag features is available.I believe it belongs to the VNP49N family.It contains 3 terminations.The 220 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 28A when operation criteria are met.The LED driving board is mounted in the way of Through Hole.The LED driver has a total of 3 pins.These electrical components are part of the OMNIFET?, VIPower? series.When this is the case, the output current is set to 49A.
VNP49N04FI Features
VNP49N04FI Applications
There are a lot of STMicroelectronics VNP49N04FI Power Switches ICs applications.
- USB Power Distribution
- Wireless/Networking Cards
- Wireless Headsets
- Wearable Devices
- Hot Swap
- Portable Devices
- Wireless Modem Data Cards
- Portable Music Players
- Set-top-box
- Solid State Drivers