VNP5N07
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 70V |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Current Rating | 5A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNP5N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Voltage | 70V |
| Interface | On/Off |
| Current | 5A |
| Output Configuration | Low Side |
| Power Dissipation | 31W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 60ns |
| Drain to Source Voltage (Vdss) | 70V |
| Continuous Drain Current (ID) | 5A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.25 μs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 200mOhm |
| Turn Off Time | 5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 15.75mm |
| Length | 10.4mm |
| Width | 4.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VNP5N07 Overview
The package is in the form of a Tube.There is a TO-220-3 package that includes it.The mounting type of the LED driver is Through Hole.General Purpose is the switch type it owns.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.As you can see, it comes from the VNP5N family.A total of 3 terminations have been recorded.For operation, we use the 3 pins.The LED driver has 1 functions.This results in the maximum output current dropping to 3.5A to meet the operation criteria.The lighting driver is mounted in the way of Through Hole.The LED driving board is equipped with a total of 3 pins.These electrical components are part of the OMNIFET II?, VIPower? series.In this case, the output current is set to 5A.
VNP5N07 Features
VNP5N07 Applications
There are a lot of STMicroelectronics VNP5N07 Power Switches ICs applications.
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Wearable Devices
- Mobile Communication Devices
- USB Power Distribution
- Portable Devices
- PDAs
- Hot-Swap Systems
- USB Power Distribution
- Solid State Drivers
