Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-3 |
Number of Pins |
3 |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Resistance |
200mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
31W |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Base Part Number |
VNP5N |
Pin Count |
3 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
5A |
Interface |
On/Off |
Current - Output (Max) |
3.5A |
Output Configuration |
Low Side |
Power Dissipation |
31W |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Continuous Drain Current (ID) |
5A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
55V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
70V |
Turn On Time |
0.25 μs |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
200m Ω (Max) |
Drain to Source Resistance |
200mOhm |
Turn Off Time |
5 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height |
9.15mm |
Length |
10.4mm |
Width |
4.6mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNP5N07-E Overview
The LED driver's packaged as a Tube.It is included in the package TO-220-3.The LED driver is mounted as Through Hole.It owns General Purpose switch type.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the VNP5N family.It contains 3 terminations.In order to operate, the 3 pins are used.It consists of 1 functions.The maximum output of the LED driving board is 3.5AV.This operation requires the maximum output current to be decreased to 5A.Through Hole is mounted in the way.The LED driving board is equipped with a total of 3 pins.In this LED driving board, there is 200mOhm resistance.These electrical components are part of the OMNIFET II?, VIPower? series.This case has the output current set to 5A.
VNP5N07-E Features
Resistance of 200mOhm
VNP5N07-E Applications
There are a lot of STMicroelectronics VNP5N07-E Power Switches ICs applications.
- Gaming
- Hot Swap
- Set-top-box
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- PC Card Hot Swap
- Hard Disk Drives
- Smartphone and PDA
- PDAs
- Wearable Devices