Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
ISOWATT-220-3 |
Number of Pins |
3 |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Voltage - Rated DC |
70V |
Max Power Dissipation |
24W |
Technology |
MOS |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Current Rating |
5A |
Base Part Number |
VNP5N |
Pin Count |
3 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Interface |
On/Off |
Nominal Supply Current |
250μA |
Output Configuration |
Low Side |
Power Dissipation |
24W |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Characteristics |
OPEN-DRAIN |
Continuous Drain Current (ID) |
5A |
Output Polarity |
TRUE |
Ratio - Input:Output |
1:1 |
Input Characteristics |
SCHMITT TRIGGER |
Voltage - Load |
55V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
70V |
Turn On Time |
0.25 µs |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
200m Ω (Max) |
Drain to Source Resistance |
200mOhm |
Turn Off Time |
5 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VNP5N07FI Overview
Tube is the way it's packaged.In the ISOWATT-220-3 package, it is included.A Through Hole mounting is used for the LED driving board.General Purpose is the switch type it owns.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.It belongs to the VNP5N family.The termination count is 3.The operation is carried out using the 3 pins.It has 1 functions.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.This lighting driver is mounted in the way of Through Hole.3 pins are equipped with it.The OMNIFET II?, VIPower? series includes this electrical component.This results in a 5A output current.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.
VNP5N07FI Features
VNP5N07FI Applications
There are a lot of STMicroelectronics VNP5N07FI Power Switches ICs applications.
- Set-top-box
- Hot Swap
- Notebook PC
- Wireless Modem Data Cards
- USB Power Distribution
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Handheld Devices
- Wireless/Networking Cards
- USB Ports/Hubs