VNQ05XSP16
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerBSOP (0.370, 9.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 78W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ05 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 5.5/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side |
| Power Dissipation | 78W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 110m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ05XSP16 Overview
As you can see, it's packaged in the way of a Tube.There is a 16-PowerBSOP (0.370, 9.40mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 4 outputs.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the VNQ05 family.The termination count is 16.The operation is performed through the 16 pins.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 7.5A.As long as the supply voltage is 13V, high efficiency can be achieved.Surface Mount is mounted in the way.In total, it has 16 pins.In this LED driving board, there is 110mOhm resistance.When this case is used, the output current is set to 5A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The Vsup value (maximum supply voltage) is set to 36V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5.5V.In this case, the power supply is 5.5/36V.
VNQ05XSP16 Features
Supplied from 13V
Resistance of 110mOhm
VNQ05XSP16 Applications
There are a lot of STMicroelectronics VNQ05XSP16 Power Switches ICs applications.
- Telecom and Network Systems
- Hot Swaps
- Portable/Handheld Devices
- Portable Music Players
- Portable GPS
- Various applications equipped with buttons
- USB Protection
- Portable Video Game Players
- USB Power Distribution
- PC Cards
