VNQ05XSP1613TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerBSOP (0.370, 9.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 78W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Current Rating | 7.5A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ05 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 5.5/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side |
| Power Dissipation | 78W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 110m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VNQ05XSP1613TR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 16-PowerBSOP (0.370, 9.40mm Width) package.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 4 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the VNQ05 family.It has a total of 16 terminations.The 16 pins are used for the operation of the system.It consists of 1 functions.This results in the maximum output current dropping to 7.5A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 16 pins.It has 110mOhm resistance.As a result, the output current is set to 5A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage is set to 36V.In order to operate normally, the supply voltage (Vsup) must be maintained above 5.5V.This part has a power supply of 5.5/36V.This system has a maximum current requirement of 10mA.
VNQ05XSP1613TR Features
Supplied from 13V
Resistance of 110mOhm
VNQ05XSP1613TR Applications
There are a lot of STMicroelectronics VNQ05XSP1613TR Power Switches ICs applications.
- Storage Drives
- Portable Video Game Players
- Gaming
- Portable GPS
- Wireless/Networking Cards
- Solid State Drivers
- Low Voltage I/O System Power
- Hot Swaps
- Various applications equipped with buttons
- PC Cards
