VNQ500N-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 500mOhm |
| Base Part Number | VNQ500 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Interface | On/Off |
| Current - Output (Max) | 400mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 500m Ω (Max) |
| RoHS Status | ROHS3 Compliant |
VNQ500N-E Overview
The LED driver's packaged as a Tube.There is a PowerSSO-12 package that includes it.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 4 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.It belongs to the VNQ500 family.The 12 pins are used for the operation of the system.The lighting driver's maximum output is 400mAV.This operation requires the maximum output current to be decreased to 700mA.The LED driving board is mounted in the way of Surface Mount.Lighting drivers with 500mOhm resistance are used.
VNQ500N-E Features
Resistance of 500mOhm
VNQ500N-E Applications
There are a lot of STMicroelectronics VNQ500N-E Power Switches ICs applications.
- Hot Swaps
- USB Ports/Hubs
- Various applications equipped with buttons
- Hot-Swap Systems
- Portable Video Game Players
- PC Cards
- Wireless Headsets
- Set-top-box
- Portable Devices
- PC Card Hot Swap
