VNQ500PEPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 7.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ500 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 400mA |
| Nominal Supply Current | 8mA |
| Output Configuration | High Side |
| Power Dissipation | 7.3W |
| Output Current | 900mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 75 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Number of Drivers | 4 |
| Rds On (Typ) | 500m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.7mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ500PEPTR-E Overview
It is packaged in the form of a Tape & Reel (TR).The 12-PowerLSOP (0.154, 3.90mm Width) package includes it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the VNQ500 family.It consists of 12 terminations in total.In order to operate, the 12 pins are used.There are 4 functions of the LED driver.400mAV is the maximum output of the LED driver.In order to meet the operation criteria, the maximum output current drops to 900mA.High efficiency is possible at 13V supply voltage.It is mounted in the way of Surface Mount.It is equipped with a total of 12 pins.500mOhm resistance is present in the lighting driver.When this case is used, the output current is set to 900mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).It has a power supply of 8/36V.The supply voltage should be set at 13V for best efficiency.It has a maximum current requirement of 8mA.There are 4 drivers available for this part.
VNQ500PEPTR-E Features
Supplied from 13V
Resistance of 500mOhm
VNQ500PEPTR-E Applications
There are a lot of STMicroelectronics VNQ500PEPTR-E Power Switches ICs applications.
- PC Card Hot Swap
- PC Cards
- Portable Video Game Players
- USB Protection
- HDD, SSD
- Hot Swap
- Mobile Communication Devices
- Notebook PC
- USB Power Distribution
- Solid-State Drives
