VNQ5027AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Series | VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 27mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNQ502 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 42A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Output Current | 42A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 29A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 40 μs |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 42A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 4 |
| Rds On (Typ) | 27m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5027AK-E Overview
Tray is the way it's packaged.In the 24-PowerBSOP (0.295, 7.50mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The VNQ502 family contains this object.It contains 24 terminations.In order to operate, 24 pins are used.It consists of 4 functions.The maximum output current drops to 42A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.The lighting driver is mounted in the way of Surface Mount.In total, it has 24 pins.Lighting drivers with 27mOhm resistance are used.These electrical components are part of the VIPower? series.When this is the case, the output current is set to 42A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 13V.It has 4 drivers in the part.
VNQ5027AK-E Features
Supplied from 13V
Resistance of 27mOhm
VNQ5027AK-E Applications
There are a lot of STMicroelectronics VNQ5027AK-E Power Switches ICs applications.
- PC Cards
- Smart Phones, Feature Phones
- Hot Swap
- Smartphone and PDA
- Notebook PC
- Solid State Drivers
- Telecom and Network Systems
- Portable GPS
- Wireless Modem Data Cards
- Portable Video Game Players
