VNQ5027AKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 27mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ502 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 42A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Output Current | 42A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 29A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 4 |
| Rds On (Typ) | 27m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.22mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5027AKTR-E Overview
It is package in Tape & Reel (TR) case.It is included with the 24-SOP (0.295, 7.50mm Width) Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The VNQ502 family contains this object.As a result, there are 24 terminations.For operation, we use the 24 pins.Currently, there are 4 functions associated with the lighting driver.This operation requires the maximum output current to be decreased to 42A.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 24 pins.The LED driver has 27mOhm resistance.This electrical component can be found in the VIPower? series.This case has the output current set to 42A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The Vsup value (maximum supply voltage) is set to 36V.This part has a power supply of 8/36V volts.Optimal efficiency requires a voltage of 13V.A total of 4 drivers are included in this part.
VNQ5027AKTR-E Features
Supplied from 13V
Resistance of 27mOhm
VNQ5027AKTR-E Applications
There are a lot of STMicroelectronics VNQ5027AKTR-E Power Switches ICs applications.
- USB Power Distribution
- Hot Swap
- Smart Phones, Feature Phones
- Hot-Swap Systems
- Solid State Drivers
- Notebook PC
- Solid-State Drives
- Wearable Devices
- Hard Disk Drives
- Set-Top Boxes
