VNQ5050AKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Manufacturer Package Identifier | PowerSSO-24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNQ505 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 13.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 8mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 4 |
| Rds On (Typ) | 50m Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| On-State Resistance | 50mOhm |
| Height | 2.45mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5050AKTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 24-PowerBSOP (0.295, 7.50mm Width) package.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It is part of the VNQ505 family of LED drivers.As a result, there are 24 terminations.In order to operate, 24 pins are used.It has 1 functions.This results in the maximum output current dropping to 13.5A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way.A total of 24 pins are present on it.These electrical components are part of the VIPower? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The LED driver is configured with a maximum supply voltage of 36V (Vsup).This part's power supply is 8/36V.It is recommended to set the supply voltage to 13V for optimum efficiency.There are 4 drivers associated with the part.
VNQ5050AKTR-E Features
Supplied from 13V
VNQ5050AKTR-E Applications
There are a lot of STMicroelectronics VNQ5050AKTR-E Power Switches ICs applications.
- Portable GPS Device
- Notebook and Tablet Computers
- Set-top-box
- Handheld Devices
- Storage Drives
- Hot Swap
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Hot Swaps
- Hard Disk Drives
