banner_page

VNQ5160K-E

8/36V N-Channel 0.8mm PMIC VIPower? Series VNQ5160 24 Pin 13V 24-PowerBSOP (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VNQ5160K-E
  • Package: 24-PowerBSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 300
  • Description: 8/36V N-Channel 0.8mm PMIC VIPower? Series VNQ5160 24 Pin 13V 24-PowerBSOP (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 8 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-PowerBSOP (0.295, 7.50mm Width)
Number of Pins 24
Operating Temperature -40°C~150°C TJ
Packaging Tray
Series VIPower™
Feature Auto Restart, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Resistance 160mOhm
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 13V
Terminal Pitch 0.8mm
Base Part Number VNQ5160
Pin Count 24
Number of Outputs 4
Output Type N-Channel
Max Output Current 5.4A
Operating Supply Voltage 13V
Supply Voltage-Max (Vsup) 36V
Power Supplies 8/36V
Interface On/Off
Current - Output (Max) 3.8A
Nominal Supply Current 2μA
Output Configuration High Side
Output Current 5A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 2μA
Input Type Non-Inverting
Turn On Delay Time 15 μs
Switch Type General Purpose
Turn-Off Delay Time 15 μs
Ratio - Input:Output 1:1
Voltage - Load 4.5V~36V
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Rds On (Typ) 160m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height 2.4mm
Length 10.5mm
Width 7.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VNQ5160K-E Overview


As you can see, it's packaged in the way of a Tray.This file is included in package 24-PowerBSOP (0.295, 7.50mm Width).The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.It is equipped with Auto Restart, Status Flag features.The VNQ5160 family contains this object.A total of 24 terminations have been found in it.The 24 pins are used for the operation of the system.Currently, there are 4 functions associated with the lighting driver.The maximum output of the LED driving board is 3.8AV.To comply with the operation criteria, the maximum output current is reduced to 5.4A.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 24 pins.160mOhm resistance is present in the lighting driver.This electrical component can be found in the VIPower? series.It is set to 5A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).It has a power supply of 8/36V.The supply voltage should be set at 13V for best efficiency.There is a maximum current requirement of 2μA for its operation.

VNQ5160K-E Features


Supplied from 13V
Resistance of 160mOhm

VNQ5160K-E Applications


There are a lot of STMicroelectronics VNQ5160K-E Power Switches ICs applications.

  • Notebook PC
  • Wireless/Networking Cards
  • USB3.1 Power Delivery
  • USB Ports/Hubs
  • Storage Drives
  • Hot Swap
  • Low Voltage I/O System Power
  • Hard Disk Drives
  • Solid-State Drives
  • Notebook and Tablet Computers

Write a review

Note: HTML is not translated!
    Bad           Good