Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-PowerBSOP (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Base Part Number |
VNQ5160 |
Pin Count |
24 |
Number of Outputs |
4 |
Output Type |
N-Channel |
Max Output Current |
5.4A |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Current - Output (Max) |
3.8A |
Nominal Supply Current |
2μA |
Output Configuration |
High Side |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
2μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Nominal Input Voltage |
13V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.5V~36V |
Driver Number of Bits |
4 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Turn On Time |
15 μs |
Rds On (Typ) |
160m Ω (Max) |
Turn Off Time |
15 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Length |
10.3mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNQ5160KTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 24-PowerBSOP (0.295, 7.50mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.Auto Restart, Status Flag features are available on the lighting driver.It comes under the family of VNQ5160.It has a total of 24 terminations.24 pins are used for operation.It is important to note that the LED driving board has 4 functions.There is a maximum output of 3.8AV from the LED driver.In order to meet the operation criteria, the maximum output current drops to 5.4A.Supply voltages of 13V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 24 pins.It has 160mOhm resistance.A component of this type is included in the VIPower? series.In this case, the output current is set to 5A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Vsup (maximum supply voltage) is set to 36V.This part is powered by 8/36V.This system has a maximum current requirement of 2μA.
VNQ5160KTR-E Features
Supplied from 13V
Resistance of 160mOhm
VNQ5160KTR-E Applications
There are a lot of STMicroelectronics VNQ5160KTR-E Power Switches ICs applications.
- Portable Video Game Players
- Notebook and Tablet Computers
- Wireless/Networking Cards
- Portable/Handheld Devices
- Mobile Communication Devices
- Portable Devices
- Set-Top Boxes
- Wearable Devices
- Portable GPS
- Set-top-box