VNQ5E050AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ5E050 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E050AK-E Overview
As a result, it is packaged in the form of a Tube.The 24-PowerBSOP (0.295, 7.50mm Width) package contains it.The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has 4 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Auto Restart features.The VNQ5E050 family contains this object.There are 24 terminations in it.24 pins are used for operation.It contains 1 functions.It is necessary to reduce the maximum output current to 27A to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 24 pins.50mOhm resistance is present in the lighting driver.There is an electrical component included in the VIPower? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 28V (Vsup).There is a voltage supply of 8/28V volts on this part.When using this LED driving board, it is recommended that the supply voltage is set to 13V.A maximum current requirement of 14mA is required for its operation.
VNQ5E050AK-E Features
Supplied from 13V
Resistance of 50mOhm
VNQ5E050AK-E Applications
There are a lot of STMicroelectronics VNQ5E050AK-E Power Switches ICs applications.
- Portable/Handheld Devices
- Hard Disk Drives
- Hot Swap
- USB Power Distribution
- Hot Swaps
- Wearable Devices
- Hot-Swap Systems
- Notebook and Tablet Computers
- Wireless/Networking Cards
- USB Ports/Hubs
