VNQ5E050K-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNQ5E050 |
| Pin Count | 24 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 4 |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E050K-E Overview
The LED driver's packaged as a Tube.It's included in the 24-PowerBSOP (0.295, 7.50mm Width) package.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.It is a member of the VNQ5E050 family.It has a total of 24 terminations.The 24 pins are used for the operation of the system.It consists of 1 functions.The maximum output current is reduced to 27A to meet the operation criteria.The supply voltage can be 13V for high efficiency.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 24 pins.There is 50mOhm resistance on the LED driver.It belongs to the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.Vsup (maximum supply voltage) is set to 28V.It has a power supply of 8/28V.For maximum efficiency, the supply voltage should be set to 13V.This system has a maximum current requirement of 14mA.It is equipped with 4 drivers.
VNQ5E050K-E Features
Supplied from 13V
Resistance of 50mOhm
VNQ5E050K-E Applications
There are a lot of STMicroelectronics VNQ5E050K-E Power Switches ICs applications.
- Mobile Communication Devices
- Low Voltage I/O System Power
- Portable GPS Device
- Set-Top Boxes
- Set-top-box
- HDD, SSD
- Wearable Devices
- Hot-Swap Systems
- PDAs
- Portable Video Game Players
