VNQ5E050KTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ5E050 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 27A |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E050KTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the 24-SOP (0.295, 7.50mm Width) Exposed Pad package.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 4 outputs that can be used.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.As you can see, it comes from the VNQ5E050 family.It contains 24 terminations.The operation is performed through the 24 pins.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 19A.As long as the supply voltage is 13V, high efficiency can be achieved.The lighting driver is mounted in the direction of Surface Mount.A total of 24 pins are included in this LED driver.This electrical component is included in the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 28V (Vsup).This part has a power supply of 8/28V volts.In order to maximize efficiency, the supply voltage should be set at 13V.For its operation, a current of 14mA is required.
VNQ5E050KTR-E Features
Supplied from 13V
VNQ5E050KTR-E Applications
There are a lot of STMicroelectronics VNQ5E050KTR-E Power Switches ICs applications.
- Portable Video Game Players
- Telecom and Network Systems
- HDD, SSD
- Hot Swap
- USB Ports/Hubs
- Portable Music Players
- Gaming
- USB3.1 Power Delivery
- Storage Drives
- USB Protection
