VNQ5E050MKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ5E050 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 28V |
| Interface | On/Off |
| Nominal Supply Current | 8mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 20 µs |
| Rds On (Typ) | 50m Ω (Max) |
| Turn Off Time | 35 µs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.5mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E050MKTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 24-SOP (0.295, 7.50mm Width) Exposed Pad package that includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 4.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.There are Auto Restart features available on the LED driving board.It is part of the VNQ5E050 family of LED drivers.It consists of 24 terminations in total.It is necessary to use the 24 pins in order to operate the LED driver.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 27A to meet the operation criteria.High efficiency is possible at 13V supply voltage.The lighting driver is mounted in the way of Surface Mount.24 pins are equipped with it.In this LED driving board, there is 50mOhm resistance.This electrical component is included in the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 28V.
VNQ5E050MKTR-E Features
Supplied from 13V
Resistance of 50mOhm
VNQ5E050MKTR-E Applications
There are a lot of STMicroelectronics VNQ5E050MKTR-E Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable GPS Device
- Various applications equipped with buttons
- HDD, SSD
- Portable/Handheld Devices
- Wireless Headsets
- Mobile Communication Devices
- Low Voltage I/O System Power
- Telecom and Network Systems
- Portable Video Game Players
