VNQ5E160K-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNQ5E160 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E160K-E Overview
It's?packaged?in?the way?of?a?Tube.There is a 24-PowerBSOP (0.295, 7.50mm Width) package that includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 4 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart.It belongs to the family VNQ5E160.In total, there are 24 terminations.For operation, 24 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 10A.With a supply voltage of 13V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 24 pins.The LED driver has 160mOhm resistance.It is part of the VIPower? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 28V (Vsup).There is a voltage supply of 8/28V volts on this part.When using this LED driving board, it is recommended that the supply voltage is set to 13V.It requires 14mA current to operate.
VNQ5E160K-E Features
Supplied from 13V
Resistance of 160mOhm
VNQ5E160K-E Applications
There are a lot of STMicroelectronics VNQ5E160K-E Power Switches ICs applications.
- Portable GPS
- Solid-State Drives
- Storage Drives
- Smartphone and PDA
- Hard Disk Drives
- Wearable Devices
- Telecom and Network Systems
- PC Cards
- USB Protection
- Low Voltage I/O System Power
