VNQ5E250AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | VNQ5E250 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 2μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Nominal Input Voltage | 13V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 4 |
| Rds On (Typ) | 250m Ω (Max) |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5E250AJ-E Overview
Tube is the way it's packaged.It is included in the package 16-PowerFSOP (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.It has a total of Auto Restart features.It comes under the family of VNQ5E250.It consists of 16 terminations in total.In order to operate, the 16 pins are used.From the lighting driver, there is a maximum output of 3.5AV.As a result, the maximum output current is reduced to 5A in order to meet the operation requirements.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 16 pins.The LED driver has 250mOhm resistance.This electrical component can be found in the VIPower? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It has a power supply of 8/28V.This system has a maximum current requirement of 14mA.There are 4 drivers associated with this part.
VNQ5E250AJ-E Features
Resistance of 250mOhm
VNQ5E250AJ-E Applications
There are a lot of STMicroelectronics VNQ5E250AJ-E Power Switches ICs applications.
- Telecom and Network Systems
- Set-top-box
- Solid-State Drives
- Portable Video Game Players
- Storage Drives
- PDAs
- Various applications equipped with buttons
- PC Card Hot Swap
- USB3.1 Power Delivery
- Handheld Devices
