VNQ600
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Current Rating | 40A |
| Base Part Number | VNQ600 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Operating Supply Voltage | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 15A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VNQ600 Overview
The package is in the form of a Tube.There is a 28-SOIC (0.295, 7.50mm Width) package that includes it.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 4.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the family VNQ600.It contains 28 terminations.For operation, 28 pins are used.Currently, there are 2 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 40A.Supply voltages of 13V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 28 pins.In this LED driving board, there is 35mOhm resistance.This case has the output current set to 25A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 13V.For maximum efficiency, the supply voltage should be set to 36V.It has a maximum input voltage of 36V volts.The minimum input voltage is 5.5V volts.It requires a maximum current requirement of 40mA.
VNQ600 Features
Supplied from 13V
Resistance of 35mOhm
VNQ600 Applications
There are a lot of STMicroelectronics VNQ600 Power Switches ICs applications.
- Wireless Headsets
- Storage Drives
- Set-top-box
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Hard Disk Drives
- HDD, SSD
- Notebook and Tablet Computers
- Portable Video Game Players
- USB Ports/Hubs
