VNQ600-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Power Dissipation | 6.25W |
| Base Part Number | VNQ600 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 15A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 35m Ω (Max) |
| RoHS Status | ROHS3 Compliant |
VNQ600-E Overview
A Tube is used to package it.There is a 28-SOIC (0.295, 7.50mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has a total of 4 outputs.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the family VNQ600.The operation is carried out using the 28 pins.Maximum output current falls to 15A when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.In this LED driving board, there is 35mOhm resistance.It is set to 25A in this case.In order to maximize efficiency, the supply voltage should be set to 36V.The maximum input voltage of the LED driver is 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.A maximum current requirement of 6mA is required for its operation.
VNQ600-E Features
Resistance of 35mOhm
VNQ600-E Applications
There are a lot of STMicroelectronics VNQ600-E Power Switches ICs applications.
- Wireless/Networking Cards
- Mobile Communication Devices
- Portable Video Game Players
- Hot Swap
- Wireless Headsets
- PC Cards
- PC Card Hot Swap
- Solid State Drivers
- USB Power Distribution
- Notebook PC
