VNQ60013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ600 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 15A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ60013TR Overview
It is packaged in the manner of a Tape & Reel (TR).This package is included in 28-SOIC (0.295, 7.50mm Width).This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 4 for output.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Auto Restart.There is a VNQ600 family of things that it belongs to.A total of 28 terminations have been recorded.For operation, we use the 28 pins.As far as functions are concerned, the lighting driver has 2.To comply with the operation criteria, the maximum output current is reduced to 15A.As long as the supply voltage is 13V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 28 pins.In this case, the output current will be set to 25A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 5.5V.A 13V power supply is used by the part.
VNQ60013TR Features
Supplied from 13V
VNQ60013TR Applications
There are a lot of STMicroelectronics VNQ60013TR Power Switches ICs applications.
- Handheld Devices
- USB Power Distribution
- Wireless/Networking Cards
- Telecom and Network Systems
- Solid-State Drives
- Various applications equipped with buttons
- Portable Devices
- Set-top-box
- HDD and SSD
- Portable Music Players
