VNQ6004SA-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerFSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Additional Feature | CH 0, 1 ILIM IS 25A, CH 2,3 ILIM IS 55A |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ600 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 55A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 25A 55A |
| Output Configuration | High Side |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 10m Ω, 30m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ6004SA-E Overview
As you can see, it's packaged in the way of a Tube.The 36-PowerFSOP (0.295, 7.50mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 4 outputs.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Auto Restart features.It is a member of the VNQ600 family.A total of 36 terminations have been recorded.The operation is performed through the 36 pins.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 25A 55AV as its maximum output.In order to meet the operation criteria, the maximum output current drops to 55A.Supply voltages of 13V allow for high efficiency.It is included in the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 28V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 5V.In this case, the power supply is 5V.By using this lighting driver, it is also possible to produce CH 0, 1 ILIM IS 25A, CH 2,3 ILIM IS 55A.
VNQ6004SA-E Features
Supplied from 13V
Additional features like CH 0, 1 ILIM IS 25A, CH 2,3 ILIM IS 55A
VNQ6004SA-E Applications
There are a lot of STMicroelectronics VNQ6004SA-E Power Switches ICs applications.
- PDAs
- Smartphone and PDA
- Telecom and Network Systems
- Solid State Drivers
- Portable/Handheld Devices
- Wireless Headsets
- Notebook and Tablet Computers
- Portable Music Players
- USB Power Distribution
- Handheld Devices
