VNQ6004SATR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerFSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Additional Feature | CH 0, 1 ILIM IS 25A, CH 2,3 ILIM IS 55A |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ600 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 55A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 25A 55A |
| Output Configuration | High Side |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 10m Ω, 30m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ6004SATR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 36-PowerFSOP (0.295, 7.50mm Width).The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There is a default setting of 4 for output.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Auto Restart features.As you can see, it comes from the VNQ600 family.The termination count is 36.It is necessary to use the 36 pins in order to operate the LED driver.The LED driver has 1 functions.From the lighting driver, there is a maximum output of 25A 55AV.To meet the operation criteria, the maximum output current drops to 55A.Using a voltage of 13V allows for high efficiency.There is an electrical component included in the VIPower? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The LED driver is configured with a maximum supply voltage of 28V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 5V.This part has a power supply of 5V.CH 0, 1 ILIM IS 25A, CH 2,3 ILIM IS 55A can also be produced by using this LED driver.
VNQ6004SATR-E Features
Supplied from 13V
Additional features like CH 0, 1 ILIM IS 25A, CH 2,3 ILIM IS 55A
VNQ6004SATR-E Applications
There are a lot of STMicroelectronics VNQ6004SATR-E Power Switches ICs applications.
- Wireless/Networking Cards
- Telecom and Network Systems
- Portable Video Game Players
- Solid State Drivers
- Mobile Communication Devices
- HDD and SSD
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Hot-Swap Systems
