banner_page

VNQ600A

13V N-Channel 1.27mm PMIC VNQ600 28 Pin 13V 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VNQ600A
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 973
  • Description: 13V N-Channel 1.27mm PMIC VNQ600 28 Pin 13V 28-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
ECCN Code EAR99
Resistance 35mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 6.25W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 13V
Terminal Pitch 1.27mm
Base Part Number VNQ600
Pin Count 28
Number of Outputs 4
Output Type N-Channel
Max Output Current 40A
Operating Supply Voltage 36V
Power Supplies 13V
Interface On/Off
Nominal Supply Current 6mA
Output Configuration High Side
Power Dissipation 6.25W
Output Current 25A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 40mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Output Current per Channel 15A
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO
Rds On (Typ) 35m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 2.65mm
Length 17.9mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VNQ600A Overview


Tube is how it's packaged.There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 4 for output.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It comes under the family of VNQ600.A total of 28 terminations have been found in it.The 28 pins are used to operate the LED driver.It has 2 functions.The maximum output current must drop to 40A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.The lighting driver is mounted in the way of Surface Mount.A total of 28 pins are present on it.In this case, there is 35mOhm resistance in the LED driving board.This results in a 25A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The power supply of the part is 13V.It is recommended to set the supply voltage to 36V for optimum efficiency.A maximum input voltage of 36V volts can be applied to it.It requires 5.5V volts as the minimum input voltage.For its operation, a current of 40mA is required.

VNQ600A Features


Supplied from 13V
Resistance of 35mOhm

VNQ600A Applications


There are a lot of STMicroelectronics VNQ600A Power Switches ICs applications.

  • Hot-Swap Systems
  • Portable Video Game Players
  • Smartphone and PDA
  • Storage Drives
  • USB Power Distribution
  • Hot Swap
  • Smart Phones, Feature Phones
  • Notebook PC
  • Solid State Drivers
  • Wearable Devices

Write a review

Note: HTML is not translated!
    Bad           Good