VNQ600A13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ600 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Operating Supply Voltage | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 15A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ600A13TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 28-SOIC (0.295, 7.50mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of VNQ600.A total of 28 terminations can be found in it.For operation, we use the 28 pins.The LED driver has 2 functions.As a result, the maximum output current is reduced to 40A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 28 pins.35mOhm is the resistance of the lighting driver.In this case, the output current is set to 25A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part is powered by 13V.In order to maximize efficiency, the supply voltage should be set to 36V.Its maximum input voltage is 36V volts.There is a minimum input voltage of 5.5V volts for this LED driver.It requires 40mA current to operate.
VNQ600A13TR Features
Supplied from 13V
Resistance of 35mOhm
VNQ600A13TR Applications
There are a lot of STMicroelectronics VNQ600A13TR Power Switches ICs applications.
- Various applications equipped with buttons
- Wireless Headsets
- Low Voltage I/O System Power
- Mobile Communication Devices
- Smart Phones, Feature Phones
- Portable Devices
- Storage (HDDs, SSDs)
- Storage Drives
- Wearable Devices
- Portable Music Players
