VNQ600APTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ600 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 15A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ600APTR-E Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 4.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is a member of the VNQ600 family.It consists of 28 terminations in total.In order to operate, the 28 pins are used.It is important to note that the LED driving board has 4 functions.The maximum output current is reduced to 15A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.28 pins are connected to it in total.As a result, the output current is set to 15A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).In this part, the power supply is set to 8/36V.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.
VNQ600APTR-E Features
Supplied from 13V
VNQ600APTR-E Applications
There are a lot of STMicroelectronics VNQ600APTR-E Power Switches ICs applications.
- Hot-Swap Systems
- HDD, SSD
- Portable Video Game Players
- PC Card Hot Swap
- Hot Swap
- USB3.1 Power Delivery
- USB Power Distribution
- Portable/Handheld Devices
- PDAs
- Wireless Headsets
