VNQ600P-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ600 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 15A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ600P-E Overview
It is package in Tube case.It is included in the package 28-SOIC (0.295, 7.50mm Width).It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.By default, it is set to output 4.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.It comes under the family of VNQ600.It consists of 28 terminations in total.The 28 pins are used to operate the LED driver.It has 4 functions.The maximum output current is reduced to 40A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 28 pins.35mOhm is the resistance of the lighting driver.This electrical component is included in the VIPower? series.When this case is used, the output current is set to 25A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).Normal operation requires Vsup above 5.5V.This part has a power supply of 8/36V.
VNQ600P-E Features
Supplied from 13V
Resistance of 35mOhm
VNQ600P-E Applications
There are a lot of STMicroelectronics VNQ600P-E Power Switches ICs applications.
- Wireless Headsets
- Various applications equipped with buttons
- PC Card Hot Swap
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Gaming
- Handheld Devices
- Notebook PC
- Wireless Modem Data Cards
- Hot-Swap Systems
