VNQ600PTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ600 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 15A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 35m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ600PTR-E Overview
Tape & Reel (TR) is the way it's packaged.Package 28-SOIC (0.295, 7.50mm Width) contains it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There are 4 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the VNQ600 family.There are 28 terminations in it.The 28 pins are used to operate the LED driver.Currently, there are 4 functions associated with the lighting driver.The maximum output current drops to 15A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.28 pins are equipped with it.This electrical component is included in the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The LED driver is configured with a maximum supply voltage of 36V (Vsup).Normal operation requires a voltage above 5.5V for the supply voltage.In this case, the power supply is 8/36V.
VNQ600PTR-E Features
Supplied from 13V
VNQ600PTR-E Applications
There are a lot of STMicroelectronics VNQ600PTR-E Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PC Cards
- USB Ports/Hubs
- Portable Devices
- Wearable Devices
- Portable GPS Device
- Portable/Handheld Devices
- PDAs
- HDD, SSD
- Gaming
