VNQ660SP
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Voltage - Rated DC | 36V |
| Max Power Dissipation | 113.6W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Current Rating | 10A |
| Base Part Number | VNQ660 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 113.6W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Drain to Source Voltage (Vdss) | 41V |
| Turn-Off Delay Time | 140 μs |
| Continuous Drain Current (ID) | 18mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 40m Ω |
| Drain to Source Resistance | 130mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ660SP Overview
Tube is how it's packaged.The PowerSO-10 Exposed Bottom Pad package includes it.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There is a default setting of 4 for output.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.Status Flag features are available on the lighting driver.It is a member of the VNQ660 family.There are 10 terminations in it.The operation is carried out using the 10 pins.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 10A.As long as the supply voltage is 13V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.A total of 10 pins are present on it.In this LED driving board, there is 40mOhm resistance.When this case is used, the output current is set to 6A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.A supply voltage of 36V is recommended for maximum efficiency.As far as input voltage goes, its maximum is 36V volts.As a minimum input voltage, it requires 5.5V volts.It requires 40mA current to operate.
VNQ660SP Features
Supplied from 13V
Resistance of 40mOhm
VNQ660SP Applications
There are a lot of STMicroelectronics VNQ660SP Power Switches ICs applications.
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Hot Swaps
- Portable Video Game Players
- Storage (HDDs, SSDs)
- PC Cards
- Notebook PC
- USB Protection
- PC Card Hot Swap
- Mobile Communication Devices
