Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Feature |
Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
40mOhm |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
114W |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Terminal Pitch |
1.27mm |
Base Part Number |
VNQ660 |
Output Type |
N-Channel |
Max Output Current |
10A |
Interface |
On/Off |
Current - Output (Max) |
6A |
Nominal Supply Current |
6mA |
Output Configuration |
High Side |
Power Dissipation |
113.6W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
6mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 μs |
Switch Type |
General Purpose |
Min Input Voltage |
5.5V |
Max Input Voltage |
36V |
Turn-Off Delay Time |
40 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
4 |
Rds On (Typ) |
40m Ω |
Max Junction Temperature (Tj) |
150°C |
Height |
3.75mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNQ660SP-E Overview
It's?packaged?in?the way?of?a?Tube.The PowerSO-10 Exposed Bottom Pad package includes it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.As you can see, it comes from the VNQ660 family.It contains 10 terminations.For operation, we use the 10 pins.From the lighting driver, there is a maximum output of 6AV.Maximum output current falls to 10A when operation criteria are met.It is positioned in the direction of Surface Mount.It has a resistance of 40mOhm.This results in a 6A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.Voltage input is limited to 36V volts.There is a minimum input voltage of 5.5V volts.This system has a maximum current requirement of 6mA.A total of 4 drivers are included in this part.
VNQ660SP-E Features
Resistance of 40mOhm
VNQ660SP-E Applications
There are a lot of STMicroelectronics VNQ660SP-E Power Switches ICs applications.
- Storage Drives
- Hot Swap
- USB Power Distribution
- Solid-State Drives
- Notebook PC
- Gaming
- Portable Music Players
- Solid State Drivers
- Portable GPS Device
- HDD, SSD