VNQ660SP13TR
| Parameters | |
|---|---|
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 113.6W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ660 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 113.6W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 70 μs |
| Rds On (Typ) | 40m Ω |
| Drain to Source Resistance | 130mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
VNQ660SP13TR Overview
A Tape & Reel (TR) is used to package it.It is included in the package PowerSO-10 Exposed Bottom Pad.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 4 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family VNQ660.A total of 10 terminations can be found in it.The 10 pins are used to operate the LED driver.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 18A.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way.As a result, it has a total of 10 pins.50mOhm resistance is present in the lighting driver.This case results in a 6A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The supply voltage should be set at 36V for best efficiency.Voltage input is limited to 36V volts.As a minimum input voltage, it requires 5.5V volts.It requires a maximum current requirement of 40mA.
VNQ660SP13TR Features
Supplied from 13V
Resistance of 50mOhm
VNQ660SP13TR Applications
There are a lot of STMicroelectronics VNQ660SP13TR Power Switches ICs applications.
- Notebook and Tablet Computers
- Solid State Drivers
- Smartphone and PDA
- Portable GPS
- Hot Swap
- Portable Video Game Players
- Portable Music Players
- HDD, SSD
- Handheld Devices
- PDAs
