Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
40mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
114W |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Supply Voltage |
13V |
Terminal Pitch |
1.27mm |
Current Rating |
10A |
Base Part Number |
VNQ660 |
Number of Outputs |
4 |
Output Type |
N-Channel |
Max Output Current |
10A |
Operating Supply Voltage |
36V |
Interface |
On/Off |
Nominal Supply Current |
6mA |
Output Configuration |
High Side |
Power Dissipation |
113.6W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
6mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 μs |
Switch Type |
General Purpose |
Min Input Voltage |
5.5V |
Clamping Voltage |
8V |
Max Input Voltage |
36V |
Turn-Off Delay Time |
40 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~36V |
Driver Number of Bits |
4 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Turn On Time |
70 μs |
Rds On (Typ) |
40m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
3.75mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNQ660SPTR-E Overview
Tape & Reel (TR) is the way it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 4 outputs.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Status Flag features.It is a member of the VNQ660 family.It has a total of 10 terminations.The 10 pins are used to operate the LED driver.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 10A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.It has 40mOhm resistance.It is part of the VIPower? series.The output current is set to 6A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to maximize efficiency, the supply voltage should be set to 36V.It has a maximum input voltage of 36V volts.It has a 5.5V volt minimum input voltage.The maximum current required for its operation is 6mA.
VNQ660SPTR-E Features
Supplied from 13V
Resistance of 40mOhm
VNQ660SPTR-E Applications
There are a lot of STMicroelectronics VNQ660SPTR-E Power Switches ICs applications.
- Portable GPS Device
- Low Voltage I/O System Power
- Storage Drives
- Portable Video Game Players
- Smart Phones, Feature Phones
- Smartphone and PDA
- USB Power Distribution
- Solid State Drivers
- Notebook and Tablet Computers
- Wearable Devices