VNQ690SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 78W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ660 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 78W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 90m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNQ690SP Overview
It is packaged in the form of a Tube.In the PowerSO-10 Exposed Bottom Pad package, it is included.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver is equipped with 4 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The lighting driver has Status Flag features.The VNQ660 family contains this object.There are 10 terminations in it.In order to operate, 10 pins are used.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 10A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 10 pins.Currently, the LED driving board has a resistance of 50mOhm ohms.This case has the output current set to 10A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this case, Vsup (maximum supply voltage) is set to 36V.The supply voltage (Vsup) should be kept above 6V for normal operation.
VNQ690SP Features
Supplied from 13V
Resistance of 50mOhm
VNQ690SP Applications
There are a lot of STMicroelectronics VNQ690SP Power Switches ICs applications.
- Hot Swap
- Hot Swap
- Solid-State Drives
- Handheld Devices
- Hard Disk Drives
- USB Power Distribution
- Portable Video Game Players
- Wireless Headsets
- Low Voltage I/O System Power
- Portable Devices
