VNQ690SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-PowerSOIC (0.370, 9.40mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 78W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ660 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 78W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 90m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ690SP-E Overview
A Tube is used to package it.It is included in the package 10-PowerSOIC (0.370, 9.40mm Width).The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has 4 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Status Flag features are available on the lighting driver.It is a member of the VNQ660 family.A total of 10 terminations have been found in it.The 10 pins are used for the operation of the system.It contains 4 functions.This operation requires the maximum output current to be decreased to 10A.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.10 pins are connected to it in total.In this LED driving board, there is 90mOhm resistance.This case results in a 10A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 13V volts.For maximum efficiency, the supply voltage should be set to 36V.Its maximum input voltage is 36V volts.As a minimum input voltage, it requires 5.5V volts.It requires 6mA current to operate.
VNQ690SP-E Features
Supplied from 13V
Resistance of 90mOhm
VNQ690SP-E Applications
There are a lot of STMicroelectronics VNQ690SP-E Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Ports/Hubs
- Notebook PC
- Wireless/Networking Cards
- Gaming
- Portable GPS
- HDD and SSD
- Portable/Handheld Devices
- Storage Drives
- Telecom and Network Systems
