VNQ690SP13TR
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 90m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 78W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ660 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 78W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
VNQ690SP13TR Overview
The package is in the form of a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has 4 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.It is part of the VNQ660 family of LED drivers.It has a total of 10 terminations.The 10 pins are used for the operation of the system.It consists of 1 functions.As a result, the maximum output current is reduced to 10A in order to meet the operation requirements.High efficiency is possible at 13V supply voltage.Surface Mount is mounted in the way.A total of 10 pins are included in this LED driver.50mOhm resistance is present in the lighting driver.This case results in a 10A output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 6V.
VNQ690SP13TR Features
Supplied from 13V
Resistance of 50mOhm
VNQ690SP13TR Applications
There are a lot of STMicroelectronics VNQ690SP13TR Power Switches ICs applications.
- Low Voltage I/O System Power
- HDD and SSD
- Smartphone and PDA
- Handheld Devices
- Solid-State Drives
- Portable Video Game Players
- Portable/Handheld Devices
- Notebook PC
- Set-top-box
- Hot Swaps
