VNQ7140AJTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VNQ7140 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 8A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 16mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 140m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ7140AJTR-E Overview
Cut Tape (CT) is the way it's packaged.Package 16-PowerLFSOP (0.154, 3.90mm Width) contains it.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 4.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.I believe it belongs to the VNQ7140 family.In total, there are 16 terminations.The 16 pins are used for the operation of the system.The LED driver has 1 functions.The maximum output current must drop to 8A to meet the operation criteria.The supply voltage can be 13V for high efficiency.The lighting driver is mounted in the way of Surface Mount.This electrical component can be found in the VIPower? series.In this case, Vsup (maximum supply voltage) is set to 28V.Normal operation requires Vsup above 4V.It requires 16mA current to operate.
VNQ7140AJTR-E Features
Supplied from 13V
VNQ7140AJTR-E Applications
There are a lot of STMicroelectronics VNQ7140AJTR-E Power Switches ICs applications.
- Wearable Devices
- Hot Swaps
- HDD and SSD
- Smart Phones, Feature Phones
- Portable Music Players
- Hot Swap
- Low Voltage I/O System Power
- Portable Video Game Players
- PC Cards
- Portable Devices
