VNQ810
| Parameters | |
|---|---|
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 4 |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Drain to Source Resistance | 320mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
VNQ810 Overview
It is package in Tube case.In the 28-SOIC (0.295, 7.50mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Auto Restart, Status Flag features are available on the lighting driver.I believe it belongs to the VNQ810 family.It has a total of 28 terminations.In order to operate, the 28 pins are used.As far as functions are concerned, the lighting driver has 2.To comply with the operation criteria, the maximum output current is reduced to 5A.A supply voltage of 13V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 28 pins are included in this LED driver.In this LED driving board, there is 160mOhm resistance.This case has the output current set to 3.5A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Vsup (maximum supply voltage) is set to 36V.A supply voltage of 13V is recommended for maximum efficiency.Drivers for this part number 4 are available.
VNQ810 Features
Supplied from 13V
Resistance of 160mOhm
VNQ810 Applications
There are a lot of STMicroelectronics VNQ810 Power Switches ICs applications.
- Notebook and Tablet Computers
- Hard Disk Drives
- Portable Music Players
- Smartphone and PDA
- PC Card Hot Swap
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Portable Devices
- Storage Drives
- USB Protection
